4m*1/8， Tenax硅烷化不锈钢填充柱应用岛津2014

Tenax硅烷化不锈钢填充柱应用岛津2014，吸附管，采样管，室内空气，TVOC，过氧化物，MTBE，裂解，芝麻香白酒，3-甲硫基丙醇，安捷伦，岛津，赛默飞，瓦里安，布鲁克，PE

Tenax硅烷化不锈钢填充柱应用岛津2014
Tenax硅烷化不锈钢填充柱应用岛津2014 详细信息：

适用于：安捷伦，岛津，赛默飞，瓦里安，布鲁克，PE，磐诺，北分瑞利，东西电子，科创，华爱，郎溪，川仪，福立，天瑞，天美，川仪，鲁南瑞虹等

聚2，6一二苯基对苯醚：Tenax-TA 应用领域:GC用填料和吸附剂,主要分析水、土壤、 大气、呼吸气、香精香料和室内空气的高沸点化合物,如醇、酚、胺、醛、酮和卤代芳烃等。

Tenax硅烷化不锈钢填充柱应用岛津2014  测试谱图：




Tenax Silanized Stainless Steel Filled Column Application Shimadzu 2014
Tenax Silanized Stainless Steel Filled Column Application Shimadzu 2014 Details:
Name: Silanized Stainless Steel Filled Column
model: TENAX, 60-80 mesh
Specification: 4m * 1/8
Maximum operating temperature: 350 ° C
Number: 20241217006
Applicable to: Agilent, Shimadzu, Thermo Fisher, Varian, Brooke, PE， Panno, Beifen Ruili, Dongxi Electronics, Kechuang, Huaai, Langxi, Chuanyi, Fuli, Tianrui, Tianmei, Chuanyi, Lunan Ruihong, etc
Poly (2,6-diphenyl-phenyl ether): Tenax TA application field: filler and adsorbent for GC, mainly analyzing high boiling point compounds such as alcohol, phenol, amine, aldehyde, ketone and halogenated aromatic hydrocarbon in water, soil, atmosphere, breathing gas, essence and fragrance and indoor air.
Tenax TA is an adsorbent that can quickly reach a deposition temperature of approximately 35 degrees Celsius without the need for other cooling equipment. Additionally, it does not adsorb water vapor, thus avoiding interference caused by other substances in general analysis processes.
Tenax TA is a 2,6-diphenylfuran porous polymer resin widely used for the adsorption collection of volatile or semi volatile substances in gases, liquids, and solids. It can also be used for volatile compounds in high humidity samples and as a filling material, designated for use in many standard analytical methods by the US EPA (Environmental Protection Agency) and NIOSH. When used in conjunction with short-range thermal desorption systems, volatile compounds at ppb and ppt levels can be detected.
Tenax TA is a porous polymer based on 2,6-diphenylfuran (2,6-diphenylene oxide), used for extracting volatile and semi volatile substances generated by gas, liquid, and solid blowdown. EPA and NIOSH have adopted this method as a standard analytical method for analyzing VOC components, which can detect volatile organic compounds at ppb or ppt levels using thermal analysis or blowdown capture devices. Due to its low affinity for water, it is more suitable for blowing and capturing volatile organic compounds from high water content, and even for analyzing volatile organic compounds in water.
Tenax TA application field: filler and adsorbent for GC, mainly analyzing high boiling point compounds of water, soil, atmosphere, respiratory gas, essence and fragrance and indoor air, such as alcohol, phenol, amine, aldehyde, ketone and halogenated aromatic hydrocarbon.
Tenax Silanized Stainless Steel Filled Column Application Shimadzu 2014 Test Spectrum: