HJ 604-2017-HH-THC-30脱活毛细管空柱 环境空气 总烃、甲烷和非甲烷总烃的测定 直接进样

环境空气 总烃、甲烷和非甲烷总烃的测定 直接进样，芝麻香白酒，3-甲硫基丙醇，乙酸乙酯，医疗器械，环氧乙烷，增塑剂，顶空进样器，热解吸仪，裂解，氨水，氨气，MTBE，TENAX-TA

环境空气 总烃、甲烷和非甲烷总烃的测定 直接进样
环境空气 总烃、甲烷和非甲烷总烃的测定 直接进样 详细信息：

名称：总烃毛细管色谱柱

固定相：脱活的毛细管空柱

规格：30m*0.53mm

型号：HH-THC-30

材质：熔融石英

应用：HJ 604-2017 环境空气 总烃、甲烷和非甲烷总烃的测定 直接进样-气相色谱法

为贯彻《中华人民共和国环境保护法》和《中华人民共和国大气污染防治法》，保护环境，保障人体健康，规范环境空气中总烃、甲烷和非甲烷总烃的测定方法，制定本标准。本标准规定了测定环境空气中总烃、甲烷和非甲烷总烃的直接进样-气相色谱法。

HJ 604-2017 环境空气 总烃、甲烷和非甲烷总烃的测定 直接进样-气相色谱法（发布稿）
 HJ 604-2017 环境空气 总烃、甲烷和非甲烷总烃的测定 直接进样-气相色谱法（发布稿）
本标准于2018-3-1代替HJ 604-2011 环境空气 总烃的测定 气相色谱法 
本标准规定了测定环境空气中总烃、甲烷和非甲烷总烃的直接进样-气相色谱法。
本标准适用于环境空气中总烃、甲烷和非甲烷总烃的测定，也适用于污染源无组织排放监控点空气中总烃、甲烷和非甲烷总烃的测定。
当进样体积为1.0 ml 时，本标准测定总烃、甲烷的检出限均为0.06 mg/m3（以甲烷计），测定下限均为0.24 mg/m3（以甲烷计）；非甲烷总烃的检出限为0.07 mg/m3（以碳计），测定下限为0.28 mg/m3（以碳计）。



Ambient air Determination of total hydrocarbons, methane and non-methane total hydrocarbons Direct injection
Ambient Air Determination of Total Hydrocarbons, Methane and Non-Methane Total Hydrocarbons Direct Injection Details:

Name: Total Hydrocarbon Capillary Column

Stationary phase: deactivated capillary empty column

Specifications: 30m*0.53mm

Model: HH-THC-30

Material: Fused Silica

Application: HJ 604-2017 Ambient Air Determination of Total Hydrocarbons, Methane and Non-Methane Total Hydrocarbons Direct Injection-Gas Chromatography

This standard is formulated in order to implement the Environmental Protection Law of the People's Republic of China and the Law of the People's Republic of China on the Prevention and Control of Air Pollution, protect the environment, protect human health, and standardize the determination methods of total hydrocarbons, methane and non-methane total hydrocarbons in ambient air. This standard specifies the direct injection-gas chromatography method for the determination of total hydrocarbons, methane and non-methane total hydrocarbons in ambient air.


HJ 604-2017 Ambient Air-Determination of Total Hydrocarbons, Methane and Non-Methane Total Hydrocarbons Direct Injection-Gas Chromatography (Release)
 HJ 604-2017 Ambient Air Determination of Total Hydrocarbons, Methane and Non-Methane Total Hydrocarbons Direct Injection-Gas Chromatography (Release)
This standard replaces HJ 604-2011 Ambient air-Determination of total hydrocarbons-Gas chromatography on 2018-3-1
This standard specifies the direct injection-gas chromatography method for the determination of total hydrocarbons, methane and non-methane total hydrocarbons in ambient air.
This standard applies to the determination of total hydrocarbons, methane and non-methane total hydrocarbons in ambient air, and also applies to the determination of total hydrocarbons, methane and non-methane total hydrocarbons in the air at monitoring points of fugitive emissions from pollution sources.
When the injection volume is 1.0 ml, the detection limit of this standard for the determination of total hydrocarbons and methane is 0.06 mg/m3 (calculated as methane), and the lower detection limit is 0.24 mg/m3 (calculated as methane); non-methane total hydrocarbons The detection limit is 0.07 mg/m3 (calculated by carbon), and the lower limit of determination is 0.28 mg/m3 (calculated by carbon).