WL-1 气体稳流阀 气路精密稳定流量

输入压力：≤0.6Mpa输出压力：≤0.4Mpa

输出流量: 0-1000ml/min (≥ 0.25 Mpa)输入输出压降: ≥0.05Mpa

稳流精度: ≤2.0％ FL/15min安装开孔:Ф12.5mm

输入输出管径: Ф3.0mm外形尺寸：38×38×300(主体,不含气路接头,旋钮

用途：广泛用于气体流量稳定的自动调节，诸如色仪,原子吸收，火焰光度，生化仪器，石油化工及环保仪器等。特殊需要另行安排定制。

使用说明:气体稳流阀通常为1个进口2个出口,其中一个出口可接压力表或不用堵住.进口处标有箭头. 输出流量的大小通过旋钮调节,逆时针转动输出流量增大,反之, 顺时针转动输出流量减小.精密阀门应缓慢调节.为了达到良好的稳流效果,一般要在稳流阀前加接稳压阀.

气体稳流阀 气路精密稳定流量 测试谱图：



Gas flow valve, precise and stable flow of gas path
Gas flow valve Precise and stable flow of gas path Details:

Gas flow valve Precise and stable flow of gas circuit High-end valve for laboratory instruments Connect 2 3 6mm 1/8 tube

Gas flow valve WF-1

Input pressure: ≤0.6Mpa Output pressure: ≤0.4Mpa
Output flow: 0-1000ml/min (≥ 0.25 Mpa) Input and output pressure drop: ≥0.05Mpa
Steady flow accuracy: ≤2.0% FL/15min Installation opening: Ф12.5mm
Input and output pipe diameter: Ф3.0mm Dimensions: 38×38×300 (main body, without air connection, knob
Uses: Widely used in automatic adjustment of gas flow stability, such as colorimeters, atomic absorption, flame photometry, biochemical instruments, petrochemical and environmental protection instruments, etc. Special needs can be customized separately.
Instructions for use: The gas steady flow valve usually has 1 inlet and 2 outlets. One of the outlets can be connected to a pressure gauge or does not need to be blocked. The inlet is marked with an arrow. The output flow is adjusted by the knob, and the output flow is increased by turning it counterclockwise. On the contrary, turn clockwise to reduce the output flow. The precision valve should be adjusted slowly. In order to achieve a good flow stabilization effect, it is generally necessary to add a pressure regulator valve before the flow stabilization valve.

Gas flow valve Precise and stable flow of gas path Test spectrum: