Porapak Q 填充柱 测定电子工业用气体氧中氧化亚氮

测定电子工业用气体氧中氧化亚氮，液化石油气，二甲醚，甲缩醛，乙缩醛，乙醇，室内空气，焦炉煤气，炼厂气，天然气，变压器油，多氯联苯，植物油，6号溶剂残留，裂解进样器

测定电子工业用气体氧中氧化亚氮
测定电子工业用气体氧中氧化亚氮 详细信息：

分析色谱柱1:
规格： 6m*2mm（内径）
材质：不锈钢管，
粒度：内装粒度为0.18mm-0.25um
型号：Porapak Q，
应用：分析氧中氧化亚氮组分

切割色谱柱1：
规格：6m*2mm（内径）
材质：不锈钢管，
粒度：内装粒度为0.18mm-0.25um
型号：Porapak Q，
应用：分析氧中氧化亚氮组分时的切割

本标准规定了电子工业用氧的技术要求，试验方法以及包装、标志、贮运及安全。 本标准适用于以深冷法、电解法提取的气态或液态氧，以及经纯化方法得到的氧。它们主要用于二氧化硅化学气相淀积，用作氧化源和生产高纯水的反应剂，用于等离子体蚀刻和剥离、光导纤维。 分子式：O2。 相对分子质量：31.998 8（按2005年国际相对原子质量计算）。

测定电子工业用气体氧中氧化亚氮 测试谱图：


Determination of Nitrous Oxide in Gas Oxygen for Electronic Industry
Determination of nitrous oxide in gaseous oxygen used in the electronics industry Details:

Analytical column 1:
Specification: 6m*2mm (inner diameter)
Material: stainless steel tube,
Particle size: the internal particle size is 0.18mm-0.25um
Model: Porapak Q,
Application: Analysis of nitrous oxide components in oxygen

Cutting column 1:
Specification: 6m*2mm (inner diameter)
Material: stainless steel tube,
Particle size: the internal particle size is 0.18mm-0.25um
Model: Porapak Q,
Application: Cutting when analyzing nitrous oxide components in oxygen

This standard specifies the technical requirements, test methods, packaging, marking, storage and transportation, and safety of oxygen in the electronics industry. This standard applies to gaseous or liquid oxygen extracted by cryogenic and electrolytic methods, and oxygen obtained by purification methods. They are mainly used for chemical vapor deposition of silicon dioxide, as an oxidation source and as a reactant for the production of high-purity water, for plasma etching and stripping, and optical fiber. Molecular formula: O2. Relative molecular mass: 31.998 8 (calculated according to the 2005 international relative atomic mass).

Determination of nitrous oxide in gaseous oxygen used in the electronics industry Test spectrum: